Headlight Adaptor Headlight harnesses

Connector info

Connectors are clasified by the terminal not the plastic housing:

20140325_184339
A 9005 Male connector

A male connector is the same as the bulb.

 

 

 

 

 

 

 

9005 Female connector
9005 Female connector

A female connector is the same as on the harness and plugs into the bulb.

 

 

 

 

 

Example: If you have a 9006 bulb and are installing a H8 bulb you would want: Male 9006 to Female H8.

*Custom adaptors*

If you dont see an adaptor harness you need please email me as there are so many different combinations that can be made.

 

 

4651

A 4651 bulb is a single filament 2 terminal bulb.

4651 to 9005

4651 to 9005 hi low
4651 to 9005

This will allow you to install a 9005 bulb in place of your 4651 bulb.

4651 socket plugs into your harness, 9005 socket plugs into 9005 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair (2 harness)

4651 to 9006

4651 to 9006
4651 to 9006 low beam only

This will allow you to install a 9006 bulb in place of your 4651 bulb.

4651 socket plugs into your harness, 9006 socket plugs into 9006 bulb.

This will turn the headlight on as a low beam only

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair (2 harness)

4651 to H8 or H11

4651 to H8 H11
4651 to H8 low beam

4651 socket plugs into your harness, H8 socket plugs into H8 or H11 bulb.

This will turn the headlight on as a low beam only

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

This will turn the headlight on as a low beam only.

$25.00 pair (2 harness)

4651 to H9

4651 to H9
4651 to H9 low beam

This will allow you to install a H9 bulb in place of your 4651 bulb.

4651 socket plugs into your harness, H9 socket plugs into H9 bulb.

This will turn the headlight on as a low beam only

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair. (2 harnesses)

4656

A 4656 bulb is a dual filament bulb with 3 terminal.

Dual filament means it has low and high function.

4656 to 9005 TO OPERATE AS A LOW BEAM

4656 to 9005
4656 to 9005 low beam

This will allow you to install a 9005 bulb in place of your 4656 bulb and have it turn on as the low beam.

4656 socket plugs into your harness, 9005 socket plugs into 9005 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair. (2 harnesses)

4656 to 9005 TO OPERATE AS HIGH BEAM

4656 to 9005
4656 to 9005 high beam

This will allow you to install a 9005 bulb in place of your 4656 bulb and have it turn on as the high beam.

4656 socket plugs into your harness, 9005 socket plugs into 9005 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair. (2 harnesses)

4656 to 9005 TO OPERATE AS LOW AND HIGH BEAM

This will allow you to install a 9005 bulb in place of your 4656 bulb and have it turn on as the low and high beam.

4656 socket plugs into your harness, 9005 socket plugs into 9005 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

4656 to 9005
4656 to 9005 low and high beam

$35.00 pair. (2 harnesses)

4656 to H8 or H11 TO OPERATE AS A LOW BEAM

4651 to H8 H11
4651 to H8/H11 low beam only

4656 socket plugs into your harness, H8 socket plugs into H8 or H11 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair. (2 harnesses)

4656 to H8 OR H11 TO OPERATE AS HIGH BEAM

This will allow you to install a H8 or H11 bulb in place of your 4656 bulb and have it turn on as a high beam.

4656 socket plugs into your harness, H8 socket plugs into H8 or H11 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair. (2 harnesses)

4651 to H8 H11
4651 to H8/H11 high beam only

4656 to H8 or H11 TO OPERATE AS LOW AND HIGH BEAM

This will allow you to install a H8 or H11 bulb in place of your 4656 bulb and have it turn on as a low and high beam.

4656 socket plugs into your harness, H8 socket plugs into H8 or H11 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$35.00 pair. (2 harnesses)

4651 to H8 H11 hi low
4656 to H8/H11 low and high

4656 to H9 TO OPERATE AS A LOW BEAM

4651 to H9 hi low
4656 to H9 low beam

4656 socket plugs into your harness, H9 socket plugs into H9 bulb to turn on as a low beam

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair. (2 harnesses)

4656 to H9 TO OPERATE AS HIGH BEAM

4656 socket plugs into your harness, H9 socket plugs into H9 bulb to turn on as a high beam

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair. (2 harnesses)

4656 to H9
4656 to H9 high beam

4656 to H9 TO OPERATE AS LOW AND HIGH BEAM

4656 socket plugs into your harness, H9 socket plugs into H9 bulb to turn on as a low and high beam

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$45.00 pair. (2 harnesses)

4651 to H8 H11 hi low
4656 to H8/H11 low and high beam

9004

 

 

 

9004 TO 9006 low and 9005 high beam

9004 to 9005 9006If you are swaping out your single bulb headlights to the dual bulbs this will allow you to install a 9005 and 9006  bulbs in place of your 9004 bulb.

9004 socket plugs into your harness, 9005 and 9006 sockets plug into 9005 and 9006 bulbs.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$45.00 pair. (2 harness)

9004 to 9007

9004 to 9007
9004 to 9007

This will allow you to install a 9007  bulb in place of your 9004 bulb.

9004 socket plugs into your harness, 9007 socket plugs into 9007 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair (2 harness)

9004 to H13

9004 to H13
This will allow you to install a H13  bulb in place of your 9004 bulb.

9004 socket plugs into your harness, H13 socket plugs into H13 bulb.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair. (2 harnesses)

9004 to H4

9004 70 H4
9004 70 H4

9004 socket plugs into your harness, H4 socket plugs into H4 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

H4 is the same as 9003, 6014, 6006

$25.00 pair (2 harness)

9004 TO H7 low and H7 high

This will allow you to install a H7 low beam and H7 high beam bulbs in place of your 9004 bulb.

9004 socket plugs into your harness, H7 and H7 sockets plug into H7 and H7 bulbs.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$45.00 pair (2 harness)

9004 TO H7 low beam only

9004 to H7
9004 to H7 low beam

This will allow you to install a H7 as a low beam bulbs in place of your 9004 bulb.

9004 socket plugs into your harness, H7 socket plugs ino H7 bulb.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair (2 harness)

9004 TO H8 low and H8 high

This will allow you to install a H8 and H8  bulbs in place of your 9004 bulb.

9004 socket plugs into your harness, H8 and H8 sockets plug into H8 low beam and H8 high beam bulbs.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$45.00 pair (2 harness)

9004 TO H9 low and H9 high

9007 to H9 and H9
9007 to H9 low and H9 high

This will allow you to install a H9 and H9  bulbs in place of your 9004 bulb.

9004 socket plugs into your harness, H9 and H9 sockets plug into H9 and H9 bulbs.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$45.00 pair (2 harness)

9005

 

 

 

9005 to 880

9005 to 880 Headlight Adaptor Harness
9005 to 880

This will allow you to install a 880 bulb in place of your 9005 bulb.

9005 socket plugs into your harness, 880 socket plugs into 880 bulb.

made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair (2 harness)

9005 to 9006

H8/H11 to 9006 Headlight Adaptor Harness
9005 to 9006

This will allow you to install a 9006 bulb in place of your 9005 bulb.

9005 socket plugs into your harness, 9006 socket plugs into 9005 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair (2 harness)

9005 to H4

9005 to H4This will allow you to install a H4 bulb in place of your 9005 bulb. This will only operate the high beam part of the H4 bulb.

9005 socket plugs into your harness, H4 socket plugs into H4 bulb.

This can be used on the Toyota Headlight H4/H1 headlights.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

H4 is the same as 9003, 6014, 6006

$25.00 pair (2 harness)

9005 to H7

9005 to H7 Headlight Adaptor Harness
9005 to H7

This will allow you to install a H7 bulb in place of your 9005 bulb.

9005 socket plugs into your harness, H7 socket plugs into H7 bulb.

made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair (2 harness)

9005 to H8 or H11

9005 to H8/H11 Headlight Adaptor Harness
9005 to H8/H11

This will allow you to install a H8/H11 bulb in place of your 9005 bulb.

9005 socket plugs into your harness, H8/H11 socket plugs into H8/H11 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair (2 harness)

9005 to H9

9005 to H9 Headlight Adaptor Harness
9005 to H9

This will allow you to install a H9 bulb in place of your 9005 bulb.

9005 socket plugs into your harness, H9 socket plugs into H9 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair (2 harness)

9006

 

 

 

9006 low and 9005 high beam to 9004

This will allow you to install a 9004 bulb in place of your 9005 and 9006 bulbs.

9005 and 9006 sockets plug into your harness, 9004 socket plugs into your 9004 bulb.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

Note: if your low beam stays on with your high beam it will overheat the 9004 bulb and possibly damage the socket and wires.

To build these I will need the following info from your factory harness:

You will need a volt meter you can check these.

Are your cars headlights power or ground trigger.

On the low beam socket 9006 what wire is the power. (the socket is marked with “A” or “B” were the wire go into the socket)

On the high beam socket 9005 what wire is the power. (the socket is marked with “A” or “B” were the wire go into the socket)

9005 and 9006 sockets with “A” and “B” marked

 

$45.00 a pair (2 harness)

Please email with the information required and your PayPal address and I will send an invoice.

9006 low and 9005 high beam to 9007

This will allow you to install a 9007 bulb in place of your 9005 and 9006 bulbs.

9005 and 9006 sockets plug into your harness, 9007 socket plugs into your 9007 bulb.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

Note: if your low beam stays on with your high beam it will over heat the 9007 bulb and possibly damage the socket and wires. I recomend the relayed version.

To build these I will need the following info from your factory harness:

You will need a volt meter you can check these.

Are your cars headlights power or ground trigger.

On the low beam socket 9006 what wire is the power. (the socket is marked with “A” or “B” were the wire go into the socket)

On the high beam socket 9005 what wire is the power. (the socket is marked with “A” or “B” were the wire go into the socket)

9005 and 9006 sockets with “A” and “B” marked

 

$45.00 a pair (2 harness)

Please email with the information required and your PayPal address and I will send an invoice.

9006 low and 9005 high beam to H13

9005 9006 to H13This will allow you to install a H13 bulb in place of your 9005 and 9006 bulbs.

9005 and 9006 sockets plug into your harness, H13 socket plugs into your H13 bulb.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

Note: if your low beam stays on with your high beam it will over heat the H13 bulb and possibly damage the socket and wires. I recomend the relayed version.

To build these I will need the following info from your factory harness:

You will need a volt meter you can check these.

Are your cars headlights power or ground trigger.

On the low beam socket 9006 what wire is the power. (the socket is marked with “A” or “B” were the wire go into the socket)

On the high beam socket 9005 what wire is the power. (the socket is marked with “A” or “B” were the wire go into the socket)

9005 and 9006 sockets with “A” and “B” marked

 

$45.00 pair (2 harness)

Please email with the information required and your PayPal address and I will send an invoice.

9006 low and 9005 high beam to H4

9005 9006 to H4
9005 / 9006 to H4

This will allow you to install a H4 bulb in place of your 9005 and 9006 bulbs. 9005 and 9006 sockets plug into your harness, H4 socket plugs into your H4 bulb. Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

Note: if your low beam stays on with your high beams it will overheat the H4 bulb and possibly damage the socket and wires.I recomend the relayed version.

To build these I will need the following info from your factory harness: You will need a volt meter you can check these. Are your cars headlights power or ground trigger. On the low beam socket 9006 what wire is the power. (the socket is marked with “A” or “B” were the wire go into the socket) On the high beam socket 9005 what wire is the power. (the socket is marked with “A” or “B” were the wire go into the socket)

9005 and 9006 sockets with “A” and “B” marked

H4 is the same as 9003, 6014, 6006

$45.00 pair (2 harness)

Please email with the information required and your PayPal address and I will send an invoice.

9006 Lowbeam / 9005 Highbeam To 9004 With Relay

Installing a 9004 headlight in place of your factory 9006 lowbeam and 9005 highbeam setup, then this harness will plug in to make the install easier.

This will allow you to install a 9004 bulb in place of your 9006 and 9005 bulbs.

9006 and 9005 sockets plug into your harness, 9004 socket plugs into your 9004 bulb.

Note: if your low beam stays on with your high beam then this relayed harness will shut off the lowbeam filament when you switch to highbeam.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$65.00 pair (2 harness)

 

9006 Lowbeam / 9005 Highbeam To 9007 With Relay

Installing a 9007 headlight in place of your factory 9006 lowbeam and 9005 highbeam setup, then this harness will plug in to make the install easier.

This will allow you to install a 9007 bulb in place of your 9006 and 9005 bulbs.

9006 and 9005 sockets plug into your harness, 9007 socket plugs into your 9007 bulb.

Note: if your low beam stays on with your high beam then this relayed harness will shut off the lowbeam filament when you switch to highbeam.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$65.00 pair (2 harness)

 

9006 Lowbeam / 9005 Highbeam To H13 With Relay

Installing a H13 headlight in place of your factory 9006 lowbeam and 9005 highbeam setup, then this harness will plug in to make the install easier.

This will allow you to install a H13 bulb in place of your 9006 and 9005 bulbs.

9006 and 9005 sockets plug into your harness, H13 socket plugs into your H13 bulb.

Note: if your low beam stays on with your high beam then this relayed harness will shut off the lowbeam filament when you switch to highbeam.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$65.00 pair (2 harness)

 

9006 Lowbeam / 9005 Highbeam To H4 With Relay

9006 low 9005 high to H4 relayed
9006 low 9005 high to H4 relayed

Installing a H4 headlight in place of your factory 9006 lowbeam and 9005 highbeam setup, then this harness will plug in to make the install easier.

This will allow you to install a H4 bulb in place of your 9006 and 9005 bulbs.

9006 and 9005 sockets plug into your harness, H4 socket plugs into your H4 bulb.

Note: if your low beam stays on with your high beam then this relayed harness will shut off the lowbeam filament when you switch to highbeam.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$65.00 pair (2 harness)

 

9006 to 880

9006 to 880 Headlight Adaptor Harness
9006 to 880

This will allow you to install a 880 bulb in place of your 9006 bulb.

9006 socket plugs into your harness, 880 socket plugs into 880 bulb.

made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair (2 harness)

9006 to 9005

9006 to 9005
9006 to 9005

This will allow you to install a 9005 bulb in place of your 9006 bulb.

9006 socket plugs into your harness, 9005 socket plugs into 9005 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair. (2 harnesses)

9006 to H4

This will allow you to install a H4 bulb in place of your 9006 bulb. This will only operate the low beam part of the H4 bulb.

9006 socket plugs into your harness, H4 socket plugs into H4 bulb.

This can be used on the Toyota Headlight H4/H1 headlights.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

H4 is the same as 9003, 6014, 6006

$25.00 pair (2 harness)

9006 to H4 low beam / 9005 to H4 high beam

Toyota Depo harness
Toyota Depo headlight adaptor harness

This is a full set of harness to allow you to install aftermarket headlights.

2) 9006 to H4 harness wired to turn on low beam.

2) 9005 to H1 adaptor harness wired as high beam.

The H4 sockets will also plug into the H1 JDM adaptors.

JDM headlight harness set.$50.00

9006 to H7

9006 to H7 Headlight Adaptor Harness
9006 to H7

This will allow you to install a H7 bulb in place of your 9006 bulb.

9006 socket plugs into your harness, H7 socket plugs into H7 bulb.

made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair. (2 harnesses)

9006 to H8 or H11

 

9006 to H8This will allow you to install a H8/H11 bulb in place of your 9006 bulb.

9006 socket plugs into your harness, H8/H11 socket plugs into H8/H11 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair. (2 harnesses)

9006 to H9

9006 to H9 Headlight Adaptor Harness
9006 to H9

This will allow you to install a H9 bulb in place of your 9006 bulb.

9006 socket plugs into your harness, H9 socket plugs into H9 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires

$25.00 pair. (2 harnesses)

9007

 

 

 

9007 to 9004

9007 to 9004
9007 to 9004

This will allow you to install a 9004 bulb in place of your 9007 bulb.

9007 socket plugs into your harness, 90047 socket plugs into 9004 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair. (2 harnesses)

9007 TO 9006 low and 9005 high beam

9004 to 9005 9006If you are swaping out your single bulb headlights to the dual bulbs this will allow you to install a 9005 and 9006  bulbs in place of your 9007 bulb.

9007 socket plugs into your harness, 9005 and 9006 sockets plug into 9005 and 9006 bulbs.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$45.00 pair. (2 harness)

9007 to H13

9007 to H13
This will allow you to install a H13  bulb in place of your 9007 bulb.

9007 socket plugs into your harness, H13 socket plugs into H13 bulb.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair. (2 harnesses)

9007 to H4

9007 to H4
9007 to H4

This will allow you to install a H4 bulb in place of your 9007 bulb.

9007 socket plugs into your harness, H4 socket plugs into H4 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

H4 is the same as 9003, 6014, 6006

$25.00 pair. (2 harnesses)

9007 TO H7 low and H7 high

This will allow you to install a H7 low beam and H7 high beam bulbs in place of your 9007 bulb.

9007 socket plugs into your harness, H7 and H7 sockets plug into H7 and H7 bulbs.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$45.00 pair (2 harness)

9007 TO H8 low and H8 high

This will allow you to install a H8 low beam and H8 high beam bulbs in place of your 9007 bulb.

9007 socket plugs into your harness, H8 and H8 sockets plug into H8 low beam and H8 high beam bulbs.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$45.00 pair (2 harness)

9007 to H8 or H11

This will allow you to install a H8/H11 bulb in place of your 9007 bulb.

9007 socket plugs into your harness, H8/H11 socket plugs into H8/H11 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

Wired as low beam.

$25.00 pair. (2 harnesses)

9007 TO H9 low and H9 high beam

9007 to H9 and H9This will allow you to install a H9 and H9  bulbs in place of your 9007 bulb.

9007 socket plugs into your harness, H9 and H9 sockets plug into H9 and H9 bulbs.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$45.00 pair. (2 harness)

H13

 

 

 

H13 to 9004

H13 to 9007 (1)This will allow you to install a 9004bulb in place of your H13 bulb.

H13 socket plugs into your harness, 9004 socket plugs into 9004 bulb.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair. (2 harnesses)

H13 to 9007

H13 to 9007 (1)This will allow you to install a 9007  bulb in place of your H13 bulb.

H13 socket plugs into your harness, 9007 socket plugs into 9007 bulb.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair. (2 harnesses)

H13 to H7 Low and H7 High

This will allow you to install a H7 bulb in place of your H13 bulb.

H13 socket plugs into your harness, H7 socket plugs into H7 low beam bulb and H7 High beam bulb.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$45.00.00 pair. (2 harnesses)

H13 to H8 low and 9005 high beam

This will allow you to install a H8 low and 9005 high bulb in place of your H13 bulb.

H13 socket plugs into your harness, H8 and 9005 sockets plug into H8 and 9005 bulb.

Made with 16gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$45.00 pair (2 harness)

 

 

H13 to H9 High beam

H13 TO H9This will allow you to install a H9 bulb in place of your H13 bulb.

H13 socket plugs into your harness, H9 socket plugs into H9 bulb or HID.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

Wired to trigger as high beam.

No low beam output.

$25.00 pair. (2 harnesses)

H13 to H9 Low and H9 high beam

H13 TO H9This will allow you to install a H9 bulb in place of your H13 bulb.

H13 socket plugs into your harness, H9 socket plugs into H9 bulb or HID.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$45.00 pair. (2 harnesses)

H13 to H9 Low beam

H13 TO H9This will allow you to install a H9 bulb in place of your H13 bulb.

H13 socket plugs into your harness, H9 socket plugs into H9 bulb or HID.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

Wired to trigger as low beam.

No high beam output.

$25.00 pair. (2 harnesses)

H4

 

 

 

H4 to 9004

H4 to 9007This will allow you to install a 9004  bulb in place of your H4 bulb.

H4 socket plugs into your harness, 9004 sockets plug into 9004 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

H4 is the same as 9003, 6014, 6006

$25.00 pair. (2 harnesses)

H4 to 9006 low and 9005 high beam

H4 to 9005 9006

This will allow you to install a 9005 and 9006  bulbs in place of your H4 bulb.

H4 socket plugs into your harness, 9005 and 9006 sockets plug into 9005 and 9006 bulbs.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

H4 is the same as 9003, 6014, 6006

$45.00 pair (2 harness)

H4 to 9007

H4 to 9007This will allow you to install a 9007  bulb in place of your H4 bulb.

H4 socket plugs into your harness, 9007 sockets plug into 9007 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

H4 is the same as 9003, 6014, 6006

$25.00 pair. (2 harnesses)

H4 to H7 low and H7 high beam

H4 TO H7 low and H7 highThis will allow you to install a H7 lowbeam and H7 highbeam bulbs in place of your H4 bulb.

H4 socket plugs into your harness, H7 and H7 sockets plug into H7 and H7 bulbs.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

H4 is the same as 9003, 6014, 6006

$25.00 each (1 harness)

H4 to H7 low and H9 high beam

This will allow you to install a H7 lowbeam and H9 highbeam bulbs in place of your H4 bulb.

H4 socket plugs into your harness, H7 and H9 sockets plug into H7 and H9 bulbs.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

H4 is the same as 9003, 6014, 6006

$25.00 each (1 harness)

H4 to H8 low and 9005 high beam

H4 to H8 and 9005This will allow you to install a H8 low and 9005 high bulb in place of your H4 bulb.

H4 socket plugs into your harness, H8 and 9005 sockets plug into H8 and 9005 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

H4 is the same as 9003, 6014, 6006

$45.00 pair (2 harness)

 

 

H4 to H8 or H11 low and H8 or H11 high beam

H4 to H8 low H8 high
H4 to H8 low H8 high

This will allow you to install a H8 or H11 lowbeam and H8 or H11 highbeam bulbs in place of your H4 bulb.

H4 socket plugs into your harness, H8/H11 and H8/H11sockets plug into H8 or H11and H8 or H11bulbs.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

H4 is the same as 9003, 6014, 6006

$25.00 each (1 harness)

H4 to H8 or H11 low and H9 high beam

H4 to H8 H11 low H9 highThis will allow you to install a H8 or H11 lowbeam and H9 highbeam bulbs in place of your H4 bulb.

H4 socket plugs into your harness, H8/H11 and H9 sockets plug into H8/H11 and H9 bulbs.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

H4 is the same as 9003, 6014, 6006

$25.00 each (1 harness)

 

H4 to H9 low and H9 high beam

H4 to H9 low H9 highThis will allow you to install a H9 lowbeam and H9 highbeam bulbs in place of your H4 bulb.

H4 socket plugs into your harness, H9 and H9 sockets plug into H9 and H9 bulbs.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

H4 is the same as 9003, 6014, 6006

$25.00 each (1 harness)

H7

 

 

 

H7 Lowbeam / H7 Highbeam To H4 With Relay

H7low H7high to H4 relayedInstalling a H4 headlight in place of your factory H7 lowbeam and H7 highbeam setup, then this harness will plug in to make the install easier.

This will allow you to install a H4 bulb in place of your H7and H7 bulbs.

H7 and H7 sockets plug into your harness, H4 socket plugs into your H4 bulb.

Note: if your low beam stays on with your high beam then this relayed harness will shut off the lowbeam filament when you switch to highbeam.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$35.00 each (1 harness)

H7 to 9005

This will allow you to install a 9005 bulb in place of your H7 bulb.

H7 socket plugs into your harness, 9005 socket plugs into 9005 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair. (2 harnesses)

H7 to 9006

This will allow you to install a 9006 bulb in place of your H7 bulb.

H7 socket plugs into your harness, 9006 socket plugs into 9006 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair. (2 harnesses)

H7 to H8 or H11

H7 to H8 / H11
H7 to H8 / H11

H7 socket plugs into your harness, H8/H11 socket plugs into H8 or H11 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair. (2 harnesses)

H7 to H9

This will allow you to install a H9 bulb in place of your H7 bulb.

H7 socket plugs into your harness, H9 socket plugs into H9 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair. (2 harnesses)

H8

 

 

 

H8 or H11 and H9 to H4

H8 low H9 high to H4
H8 low H9 high to H4

This will allow you to install a H4 bulb in place of your H8 and H9 bulbs.

H8/H11 and H9 sockets plug into your harness, H4 socket plugs into your H4 bulb and possibly damage the socket and wires.

Note: if your low beam stays on with your high beam it will over heat the H4 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

H4 is the same as 9003, 6014, 6006

H8 is the same as H11 / 880/ 886 / 893 / 899 / 894 / 896

$25.00 each (1 harness)

H8 or H11 to 880

9005 to 880 Headlight Adaptor Harness
H8/H11 to 880

This will allow you to install a 880 bulb in place of your H8 or H11 bulb.

H8/H11 socket plugs into your harness, 880 socket plugs into 880 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

H8 is the same as H11 / 880/ 886 / 893 / 899 / 894 / 896

$25.00 pair. (2 harnesses)

 

H8 or H11 to 9005

H8 H11 to 9005
H8 H11 to 9005

H8/H11 socket plugs into your harness, 9005 socket plugs into 9005 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

H8 is the same as H11 / 880/ 886 / 893 / 899 / 894 / 896

$25.00 pair. (2 harnesses)

 

H8 or H11 to 9006

H8/H11 to 9006 Headlight Adaptor Harness
H8/H11 to 9006

This will allow you to install a 9006 bulb in place of your H8 or H11 bulb.

H8/H11 socket plugs into your harness, 9006 socket plugs into 9006 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

H8 is the same as H11 / 880/ 886 / 893 / 899 / 894 / 896

$25.00 pair. (2 harnesses)

 

 

 

H8 or H11 to H7

H8/H11 to H7
H8/H11 to H7

H8/H11 socket plugs into your harness, H7 socket plugs into H7 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

H8 is the same as H11 / 880/ 886 / 893 / 899 / 894 / 896

$25.00 pair. (2 harnesses)

 

H8 or H11 to H9

H8/H11 to H9
H8/H11 to H9

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

H8 is the same as H11 / 880/ 886 / 893 / 899 / 894 / 896

$25.00 pair. (2 harnesses)

 

H8/H11 and H8/H11 to H13

H8 low H8 high to H13
H8 low H8 high to H13

This will allow you to install a H13 bulb in place of your H8/H11and H8/H11 bulbs.

H8/H11 and H8/H11 sockets plug into your harness, H13 socket plugs into your H13 bulb.

Note: if your low beam stays on with your high beam it will over heat the H13 bulb and possibly damage the socket and wires.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

H8 is the same as H11 / 880/ 886 / 893 / 899 / 894 / 896

$25.00 each (1 harness)

H8/H11 and H8/H11 to H4

 

H8 low H8 high to H4
H8 low H8 high to H4

Installing a H4 headlight in place of your factory H8/H11 and H8/ H11 setup, then this harness will plug in to make the install easier.

This will allow you to install a H4 bulb in place of your H8/H11and H8/H11 bulbs.

H8/H11 and H8/H11 sockets plug into your harness, H4 socket plugs into H4 bulb.

Note: if your low beam stays on with your high beam it will over heat the H4 bulb and possibly damage the socket and wires. I recomend the relayed version.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 each (1 harness)

H8/H11 Lowbeam / H8/H11 Highbeam To H13 With Relay

Installing a H13 headlight in place of your factory H8/H11 lowbeam and H8/H11 highbeam setup, then this harness will plug in to make the install easier.

This will allow you to install a H13 bulb in place of your H8/H11and H8/H11 bulbs.

H8/H11 and H8/H11 sockets plug into your harness, H4 socket plugs into your H13 bulb.

Note: if your low beam stays on with your high beam then this relayed harness will shut off the lowbeam filament when you switch to highbeam.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

H8 is the same as H11 / 880/ 886 / 893 / 899 / 894 / 896

$65.00 pair (2 harness)

H9

 

 

 

H9 Lowbeam / H9 Highbeam To H4 With Relay

H9 low H9 high to H4 Relayed
H9 low H9 high to H4 Relayed

Installing a H4 headlight in place of your factory H9 lowbeam and H9 highbeam setup, then this harness will plug in to make the install easier.

This will allow you to install a H4 bulb in place of your H9 and H9 bulbs.

H9 and H9 sockets plug into your harness, H4 socket plugs into your H4 bulb.

Note: if your low beam stays on with your high beam then this relayed harness will shut off the lowbeam filament when you switch to highbeam.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$65.00 pair (2 harness)

 

H9 to 880

This will allow you to install a 880 bulb in place of your H9 bulb.

H9 socket plugs into your harness, 880 socket plugs into 880 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair. (2 harnesses)

H9 to 9005

H9 to 9005
H9 to 9005

H9 socket plugs into your harness, 9005 socket plugs into 9005 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair. (2 harnesses)

H9 to 9006

This will allow you to install a 9006 bulb in place of your H9 bulb.

H9 socket plugs into your harness, 9006 socket plugs into 9006 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair. (2 harnesses)

H9 to H13

This will allow you to install a H13  bulb in place of your H9 bulb.

H9 socket plugs into your harness, H13 socket plugs into H13 bulb.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

Wired as low beam.

$25.00 pair. (2 harnesses)

H9 to H7

This will allow you to install a H7 bulb in place of your H9 bulb.

H9 socket plugs into your harness, H7 socket plugs into H7 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair. (2 harnesses)

H9 to H8 or H11

This will allow you to install a H8 or H11  bulb in place of your H9 bulb.

H9 socket plugs into your harness, H8 /H11 socket plugs into H8 or H11 bulb.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair. (2 harnesses)