H8/H11 Low beam and 9005 High beam to H13

H8 /H11 Low and 9005 High Beam to H13

H8 low 9005 High to H13

H8 low 9005 High to H13

This will allow you to install a H13 bulb in place of your H8/H11and 9005 bulbs.

H8/H11 and 9005 sockets plug into your harness, H13 socket plugs into your H13 bulb.

Note: if your low beam stays on with your high beam it will over heat the H13 bulb and possibly damage the socket and wires.

You will need to be able to test your factory harness for power and ground trigger and power and ground location in the sockets.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

H8 is the same as H11 / 880/ 886 / 893 / 899 / 894 / 896

H8/H11 Low and 9005 High beam to H13: $25.00 each (1 harness)