H9

H9 INFO

By purchasing any headlight harness adapter you assume all responsibility for knowing the proper ways of testing your factory harness and any circumstances that can happen by changing bulbs.

ALL HARNESS ARE ARE FOR OFFROAD USE ONLY.

 

H9 to H7

H9 to H7

H9 to H7

 

 

 

 

 

 

This will allow you to install a H7 bulb in place of your H9 bulb.

H9 socket plugs into your harness, H7 socket plugs into H7 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair. (2 harnesses)

 

H9 to H8/H11

This will allow you to install a H8 or H11  bulb in place of your H9 bulb.

H9 socket plugs into your harness, H8 /H11 socket plugs into H8 or H11 bulb.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair. (2 harnesses)

 

H9 to H13 low beam only

H9 to H13 low beam only

H9 to H13 lowbeam only

 

 

 

 

 

 

This will allow you to install a H13  bulb in place of your H9 bulb.

H9 socket plugs into your harness, H13 socket plugs into H13 bulb.

Made with 16 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

Wired as low beam.

$25.00 pair. (2 harnesses)

 

H8 lowbeam and H8 highbeam to H4

H9 low and H9 high beams to H4

H9 lowbeam and H9 highbeam to H4

 

 

 

 

 

 

This will allow you to install a H4 bulb in place of your H9 low beam and H9 high beam bulbs.

H9 and H9 sockets plug into your harness, H4 socket plugs into your H4 bulb.

Note: if your low beam stays on with your high beam it will over heat the H4 bulb. Please order the relayed harness.

You will need to be able to test your factory harness for power and ground trigger and power and ground location in the sockets.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

H4 is the same as 9003, 6014, 6006

$25.00 each (1 harness)

 

H9 lowbeam and H9 highbeam to H4 with relay

H9 low H9 high to H4 with relay

H9 lowbeam H9 highbeam to H4 with relay

 

 

 

 

 

 

Installing a H4 headlight in place of your factory H9 lowbeam and H9 highbeam setup, then this harness will plug in to make the install easier.

This will allow you to install a H4 bulb in place of your H9 and H9 bulbs.

H9 and H9 sockets plug into your harness, H4 socket plugs into your H4 bulb.

Note: if your low beam stays on with your high beam then this relayed harness will shut off the lowbeam filament when you switch to highbeam.

This only works if your low beam stays on with you high beam.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$35.00 each (1 harness) motorcycles

$70.00 pair (2 harness) cars

 

H9 to 880

This will allow you to install a 880 bulb in place of your H9 bulb.

H9 socket plugs into your harness, 880 socket plugs into 880 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair. (2 harnesses)

 

H9 to 9005

H9 to 9005

H9 to 9005

 

 

 

 

 

 

H9 socket plugs into your harness, 9005 socket plugs into 9005 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair. (2 harnesses)

 

H9 to 9006

This will allow you to install a 9006 bulb in place of your H9 bulb.

H9 socket plugs into your harness, 9006 socket plugs into 9006 bulb.

Made with 14 gauge SXL wire, terminals are crimped and soldered and loom is installed to protect the wires.

$25.00 pair. (2 harnesses)

 

EMAIL