Camaro

82-84 V8

82-84 Battery cables

82-84 Battery cables

Upgrade your old and under sized battery.

This is a complete set of positive and ground cables.

Cables are built using 1/0 gauge copper cable for the starter cable (32″) long, and 2 gauge copper cable for the alternator (28″) long. 11″ 10 gauge wires going to the 3 pin connector, 1/0 gauge copper cable for the engine ground (28″) long and 2 gauges for the body ground (12″) long. Solid copper ends are soldered and crimped on for the best connection. Then adhesive lined shrink is installed for protection along with boots for the battery and alternator terminals .  Flame retardant loom is installed on the positive cables. New starter cable clamps and stainless steel studs and nuts for mounting the cables to the battery.

Please check your cable lengths.

$125.00


82-84 V8 H/O battery cables for high out put alternators.

82-84 Battery cables

82-84 Battery cables

Upgrade your old and under sized battery.

This is a complete set of positive and ground cables.

Cables are built using 1/0 gauge copper cable for the starter cable (32″) long, 1/0 gauge copper cable for the alternator (28″) long. 10 gauge wires going to the 3 pin connector, 1/0 gauge copper cable for the engine ground (28″) long and 1/0 gauge for the body ground (12″) long. Solid copper ends are soldered and crimped on for the best connection then adhesive lined shrink is installed for protection along with boots for the battery and alternator terminals . Flame retardant loom is installed on the positive cables.  New clamps for the starter cable to frame and (new stainless steel battery hardware side post)

Please check your cable lengths.

$135.00


 

1987

Upgrade your old and under sized battery.

This is a complete set of positive and ground cables.

Cables are built using 1/0 gauge copper cable for the starter cable. 2 gauge copper cable for the alternator cable. 10 gauge wire for the pigtail wires to connectors. 1/0 gauge copper cable for the engine ground and 2 gauge for the body ground long. Solid copper ends are soldered and crimped on for the best connection, then adhesive lined shrink is installed for protection along with boots for the battery and alternator terminals . Flame retardant loom is installed on the positive cables. New starter cable clamps and (stainless steel studs and nuts for mounting the cables to the battery, side post).

Because there are different styles of cables used on the 1987 cars I will need information from you so I can build yours cables, Please down load the form and fill in the information needed.

Custom Battery Cable Forum

$125.00

 

88-92 Battery Cable Set 2 wire style

1988 - 1992 Camaro TPI Battery Cables

Upgrade your old and under sized battery.

This is a complete set of positive and ground cables.

Cables are built using 1/0 gauge copper cable for the starter cable(32″)long. 2 gauge copper cable for the alternator cable(41″)long. One 15″ 10 gauge wire with a female weatherpack connector and one 16″ 10 gauge wire with fuse holder with a male weather pack connector . 1/0 gauge copper cable for the engine ground (29″) long and 2 gauge for the body ground (13″) long. Solid copper ends are soldered and crimped on for the best connection, then adhesive lined shrink is installed for protection along with boots for the battery and alternator terminals . Flame retardant loom is installed on the positive cables. New starter cable clamps and stainless steel studs and nuts for mounting the cables to the battery.

Please check your cable lengths and accessory wires with the ones listed.

$125.00


88-92 H/O battery cables for high out put alternators 2 wire style

Upgrade your old and under sized battery.

This is a complete set of positive and ground cables.

Cables are built using 1/0 gauge copper cable for the starter cable(32″)long. 1/0 gauge copper cable for the alternator cable(41″)long. One 15″ 10 gauge wire with a female weatherpack connector and one 16″ 10 gauge wire with fuse holder with a male weather pack connector . 1/0 gauge copper cable for the engine ground (29″) long and 1/0 gauge for the body ground (13″) long. Solid copper ends are soldered and crimped on for the best connection, then adhesive lined shrink is installed for protection along with boots for the battery and alternator terminals . Flame retardant loom is installed on the positive cables. New starter cable clamps and (stainless steel studs and nuts for mounting the cables to the battery, side post).

Please check your cable lengths and accessory wires with the ones listed.

$135.00


88-92 Battery Cable Set with 3 pin connector

88-92 Camaro 3 pin

88-92 Camaro 3 pin

Upgrade your old and under sized battery.

This is a complete set of positive and ground cables.

Cables are built  using 1/0 gauge copper cable for the starter cable(32″)long.  2 gauge copper cable for the alternator cable(42″)long. Two 12″ 10 gauge wires with a male 3 pin metri-pack connector.  1/0 gauge copper cable for the engine ground (28″) long and 2 gauge for the body.

Please check your cable lengths and accessory wires with the ones listed.

$125.00


88-92 H/O battery cables for high out put alternators 3 pin connector

Upgrade your old and under sized battery.

This is a complete set of positive and ground cables.

Cables are built using 1/0 gauge copper cable for the starter cable(32″)long.  1/0 gauge copper cable for the alternator cable(42″)long. Two 12″ 10 gauge wires with a male 3 pin metri-pack connector. 1/0 gauge copper cable for the engine ground (28″) long and 1/0 gauge for the body ground (14″) long. Solid copper ends are soldered and crimped on for the best connection, then adhesive lined shrink is installed for protection along with boots for the battery and alternator terminals . Flame retardant loom is installed on the positive cables.   New clamps for the starter cable to frame and (new stainless steel battery hardware side post)

$135.00

Please check your cable lengths and accessory wires with the ones listed.


 

LT1

Upgrade your old and under sized battery.

This is a complete set of positive and ground cables.

Cables are built using 1/0 gauge copper cable for the starter, 2 gauge copper cable for the alternator and 2 gauge copper cable to the junction box, 1/0 gauge copper cable for the engine ground and 2 gauge copper cable to the body. All copper ends are soldered and “HEX” crimped for the best connection then adhesive lined shrink tubing is installed for protection along with boots for the battery and alternator.  Flame retardent loom is installed on the positive cables. New starter cable clamps and stainless steel studs and nuts for mounting the cables to the battery.

$125.00


LT1 H/O battery cables for high out put alternators.

Upgrade your old and under sized battery.

This is a complete set of positive and ground cables.

Cables are built using 1/0 gauge copper cable for the starter, 1/0 gauge copper cable for the alternator and 2 gauge copper cable to the junction box, 1/0 gauge copper cable for the engine ground and 1/0 gauge copper cable to the body. All copper ends are soldered and “HEX” crimped for the best connection then adhesive lined shrink tubing is installed for protection along with boots for the battery and alternator. Flame retardent loom is installed on the positive cables. New starter cable clamps and (stainless steel studs and nuts for mounting the cables to the battery, side post).

$135.00


 

LS1

LS1 Side Post Battery Cables

Upgrade your old and under sized battery.

This is a complete set of positive and ground cables.

Cables are built using 2 gauge copper cable for the starter, 2 gauge copper cable for the alternator and 2 gauge copper cable to the under hood fuse box, 2 gauge copper cable for the engine ground and 2 gauge copper cable to the body. All copper ends are soldered and “HEX” crimped for the best connection then adhesive lined shrink tubing is installed for protection along with boots for the battery and alternator terminals. Flame retardent loom is installed on the cables. New loom clamps and stainless steel studs and nuts for mounting the cables to the battery.

125.00


LS1 H/O battery cables for high out put alternators.

LS1 Side Post Battery Cables

Upgrade your old and under sized battery.

This is a complete set of positive and ground cables.

Cables are built using 1/0 gauge copper cable for the starter, 1/0 gauge copper cable for the alternator and 2 gauge copper cable to the under hood fuse box, 1/0 gauge copper cable for the engine ground and 1/0 gauge copper cable to the body. All copper ends are soldered and “HEX” crimped for the best connection then adhesive lined shrink tubing is installed for protection along with boots for the battery and alternator terminals. Flame retardent loom is installed on the cables. New loom clamps and (stainless steel studs and nuts for mounting the cables to the battery, side post).

$135.00


 

EMAIL: